Skytech Thermostatic Hand Held LCD Battery Operated Remote

Skytech Thermostatic Hand Held LCD Battery Operated Remote

SKYTECH’S remote control system was developed to provide a safe, reliable and user-friendly remote control system for gas heating appliances. This all battery system operates independently of household current. The system operates on radio frequencies with a nondirectional signals. The SYSTEM’s operating range is approximately 20 feet range. The system operates on one of 1,048,576 security codes that are programmed into the transmitter at the factory; the remote receiver's code must be matched to that of the transmitter prior to initial use.

The transmitter has ON and OFF functions that are activated by pressing either button on the face of the transmitter. When a button on the transmitter is pressed, a signal light on the transmitter illuminates briefly to verify that a signal has been sent. Upon initial use, there may be a delay of three seconds before the remote receiver will respond to the transmitter. This is part of the system’s design.

The remote receiver can be either wall-mounted in a standard plastic switch box or placed on or near the fireplace hearth. Preferably, the remote receiver should be wall-mounted in a plastic switch box, as this will protect its electronic components from both the heat produced by the gas appliance and potential damage or abuse that can occur if it is left exposed on the hearth.

FEATURES

• All battery operated - R.F.
• 4-button ON/OFF/Mode/Set transmitter, velvet touch casing
• LCD display room and thermostat temp. in °F or °C
• Flame icon and low battery indicator
• 1,048,576 security codes
• All Skytech batteries and wall clip included
• Receiver with learn function, snap-on wall plate and (18”) wires with connectors
• Receivers will learn up to TWO additional Skytech transmitters

CLICK HERE TO VIEW OWNERS MANUAL